flexural strength的例句大全

The tensile strength, impact strength, flexural strength, thermal properties and morphology of the composites were investigated.

研究了复合材料的拉伸强度 、 冲击强度 、 弯曲强度 、 形态及热性能.

The flexural strength and tensile strength slightly decreased.

复合材料的弯曲强度和拉伸强度稍有降低.

For flexural strength test of cement specimen and other nonmetallic material.

用作水泥或其它非金属脆性材料试块的抗折强度测定.

Pultruded fiberglass is stronger, and has higher flexural strength than timber.

拉挤玻璃纤维是强, 具有较高的抗弯强度比木材.

The material mechanical properties, such as flexural strength, are measured by three point bending techniques.

利用三点弯曲方法测定了材料的抗弯强度等力学性能.

Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Part 1: determination of flexural strength.

高技术陶瓷. 单片陶瓷. 室温下的机械特性. 第1部分: 抗弯强度的测定.

Flexural strength and elasticity decreased significantly with increasing wood content.

4.含木率之增加降低了抗弯强度及抗弯弹性率至为显著.

Advanced technical ceramics-Methods of testing monolithic ceramics-Thermomechanical properties-Part 1: determination of flexural strength at elevated temperatures.

高级工业陶瓷.整体陶瓷的试验方法.热机械特性. 第1部分: 高温下挠曲强度的测定.

The relationship between nucleation temperature and flexural strength was investigated.

研究表明:抗弯强度、晶相含量随温度的升高先提高然后有所下降.

The flexural strength, relative dielectric constant and dielectric dissipation factor of the composite were measured.

测试了复合材料的断裂强度, 相对介电常数和介电损耗.

Application of rock flexural strength in prediction of fractural vulcanite reservoir

岩石龟裂系数法在火山岩裂缝储集层预测中的应用

And a small quantity of m-UFD ( surface modified UFD) with 0.2% weight percentage can improve the flexural strength and hardness by 35.4% and 29.8% respectively. The m-UFD was superior to n-UFD ( not surface modified UFD).

加入0.2%（质量分数）的改性纳米金刚石后，复合树脂的挠曲强度和硬度分别提高35.4%和29.8%，改性金刚石的增强作用明显优于未经改性的金刚石；

The Evaluation of Flexural Strength after Blunting Crack in Carbon Fiber Reinforced Concrete

碳纤维增强混凝土裂纹钝化后的弯曲强度评价

The test results show that, the flexural fatigue strength of polyacrylonitrile fiber reinforced concrete beams with bottom layer steel fiber is larger than the plain concrete 15.7%;

研究证明：底层撒布较长钢纤维的聚丙烯腈纤维混凝土梁的弯曲疲劳强度比素混凝土提高15.7%；

The flexural rigidity optimal distribution of the equi-strength static-indeterminate beam under a concentrated force is studied.

研究了集中载荷作用下一次超静定等强度梁的最优刚度分布.

The effects of secondary torsion on shear strength of biaxial flexural reinforced concrete beams are analyzed.

探讨了次生扭矩对钢筋混凝土双向受弯梁抗剪承载力的影响.

Taking benefits of Germany DBV standards, It studies the hybrid effects of flexural strength and toughness of steel-synthetic fiber, so does the splitting strength and toughness. It develops the primary analysis of the shear toughness of HFC in energy approach.

参照德国DBV标准计算和评价了不同纤维掺量组合时混杂纤维混凝土的弯曲强度和韧性、劈拉强度和韧性，使用能量法对混杂纤维混凝土的剪切韧性作了初步分析。

The effect of silane coupling agents, emulsion composition and glass cloth on flexural strength of composites was studied. Furthermore, the effect of glass cloth content on peel strength of composites and effect of fluororesin content on dielectric of composites were also investigated.

实验中考察了偶联剂的种类和用量、乳液配比、玻璃布的种类对覆铜板弯曲强度的影响，玻璃布含量对剥离强度的影响，以及树脂含量对电性能的影响。

Among them, asphalt stabilized macadam materials show great advantage in high shear strength, flexural strength and fatigue resistance.

其中，沥青稳定碎石基层材料具有较高的抗剪强度、抗弯拉强度和耐疲劳性等优点。

AIM: To compare the compressive strength, tensile strength and flexural strength of bulkily filled and incrementally filled visible light-cured composite resin.

目的：比较整体固化与分层固化光固化复合树脂的压缩强度、拉伸强度及弯曲强度。